High Hardness Aluminum Front and Rear Bumper Beam Assembly for NEV

Name: High Hardness Aluminum Front and Rear Bumper Beam Assembly for NEV
Availability: InStock

1、The bumper beam assembly is manufactured from 6061 or 6082 T6 aluminum, featuring a yield strength of ≥290 MPa and a tensile strength of ≥325 MPa. A multi-cavity energy-absorbing structure effectively resists plastic deformation, protecting the vehicle frame and passenger compartment.

2、With a daily production capacity exceeding 1,000 sets and over 5 years of mass-production experience, this EV bumper beam ensures short lead times and consistent quality.

3、Long-term partnerships have been established with more than ten major NEV and traditional automakers.

Brand :
NewEnergyVehicleParts
Name :
High Hardness Aluminum Front and Rear Bumper Beam Assembly for
Material Grade :
6082/6061
Temper :
T6
Mechanical Properties :
tensile strengthRm≥325MPa yeild strength Rp0.2≥290MPa elongation延伸率：≥10%
manufacturing process :
Extrusion+CNC+CMT

Inquiry Now

High Hardness Aluminum Front and Rear Bumper Beam Assembly for

The bumper beam assembly is manufactured from 6061 or 6082 T6 aluminum, featuring a yield strength of ≥290 MPa and a tensile strength of ≥325 MPa.

A multi-cavity energy-absorbing structure effectively resists plastic deformation, protecting the vehicle frame and passenger compartment.

With a daily production capacity exceeding 1,000 sets and over 5 years of mass-production experience, this EV bumper beam ensures short lead times and consistent quality.

High Hardness Aluminum Front and Rear Bumper Beam Assembly for

Category	Technical Parameters	Standard
Product Name	High Hardness Aluminum Front and Rear Bumper Beam Assembly for	sill beam/sill beam assembly
Material Grade	6082 Aluminum Alloy	High-Strength Grade
Temper	T6	Heat Treated
Tensile Strength	≥ 325 Mpa	Structural Stability
Yield Strength	≥ 290 Mpa	Load-bearing Capacity
Elongation	≥ 10%	Ductility & Toughness
Compatible Module	Customized Dimensions	Large-Format Modules
Manufacturing process	Extrusion+CNC+CMT

Quality Control

Hardness Testing

HBW hardness testing (≥95) and Webster hardness testing are performed on each batch to confirm yield strength ≥290 MPa and tensile strength ≥325 MPa.

Impact Resistance Test

Pendulum impact or low-speed vehicle crash simulation is performed to verify plastic deformation resistance..

Dimensional Inspection

Critical mounting hole positions and profile cross-sections are checked using CMM to ensure consistent assembly fit.

Direct Factory Benefits

Capacity

Annual Production Capacity: 70,000 Tons

Customization

Support for Various Length and Cross-section Designs Based on Client Drawings

Packaging

Export-standard Protective Packaging to Prevent Deformation During Sea Freight

Frequently Asked Questions

Q1: s the quality of your products stable? Could there be dimensional variations between batches after mass production?

A: Very stable. Every batch is controlled under ISO/TS 16949, with 100% gauging inspection for critical holes and profiles. We have supplied over millions of sets with a customer complaint rate below 5 %.

Q2: How do you guarantee a 25-year lifespan in corrosive or coastal environments?

A: Normal lead time is 25~30 days. We reserve 20% flexible capacity for rush orders, with fastest delivery in 15 days upon prior agreement(Shipping time not including).

Q3: Do you have enough capacity? If we need 5,000 sets per month for six consecutive months, can you guarantee no supply interruption?

A:Our current monthly capacity is 50,000 sets. 5,000 sets/month is well within our capability, and we can sign an annual supply agreement to secure capacity.

Hot Tags :

aluminum bumper beam

high hardness aluminum bumper beam

impact resistant aluminum bumper beam

NEV front bumper beam

aluminum rear bumper beam assembly

Custom Aluminum Bumper Beam

Leave A Message

If you’re interested in our products and want to know more details, leave a message here and we’ll reply as soon as possible.

Subject : High Hardness Aluminum Front and Rear Bumper Beam Assembly for NEV

Send

Related Products

Precision Sealed Lightweight Aluminum Window Frame Assembly for Automobile

1、The window frame assembly is crafted from 6061 or 6082 T6 aluminum alloy with a tensile strength of ≥260 MPa, providing excellent impact and deformation resistance. Mounting holes are held to a tolerance of ≤ ±0.1 mm, ensuring perfect alignment with glass regulator guide rails. 2、This aluminum window frame mates seamlessly with the glass run channel for excellent sealing, significantly reducing total weight while maintaining structural rigidity. 3、A reliable solution is offered that balances affordability, longevity, and low maintenance cost.

High Precision Insulated Aluminum Battery Tray for EV Battery Pack

1、The battery tray is manufactured from 6061 or 6082 T6 aluminum profiles and plates, with a yield strength of ≥290 MPa and a Brinell hardness (HBW) of ≥95. 2、The friction stir welding (FSW) process produces porosity-free and crack-free welds with minimal thermal distortion. Arc oxidation or high-weatherability cathodic e-coating provides high insulation resistance. 3、Through five-axis CNC one-step precision machining, this aluminum battery tray achieves hole position tolerances of ≤ ±0.1 mm for mounting points, lifting points, and cooling tube interfaces. 4、Adhesive bonding processes are also supported for enhanced assembly integrity.

OEM Aluminum Energy Storage Container Supplier

Multi Scenario High Insulation Aluminum Energy Storage Container Enclosure

1、The energy storage container is assembled from 6061 or 6082 T6 aluminum profiles and plates, with a yield strength of ≥260 MPa. 2、Robotic MIG welding or FSW provides high resistance to static pressure and wind-induced vibration, ensuring structural integrity in harsh conditions. The coating delivers excellent sealing and insulation to prevent external short-circuit risks, with optional waterproof sealing gaskets and dust screens for desert, coastal, or industrial environments. 3、Pre-embedded nuts and rivet nuts are integrated into this aluminum storage enclosure, enabling quick fixing of cell modules and BMS controllers.

High Rigidity Robotic Welded Aluminum Front Engine Compartment Frame

1、The front compartment frame assembly is fabricated from 6061 or 6082 T6 aluminum extrusions with a yield strength of ≥290 MPa, delivering excellent bending and torsional rigidity. 2、Robotic MIG welding and non-destructive testing (NDT) verification ensure dimensional tolerances within ±0.5 mm. Post-weld CNC one-shot finishing is applied to all mounting interfaces. 3、Pre-placed rivet nut holes with a tolerance of ±0.1 mm are featured in this aluminum engine compartment frame, greatly simplifying final assembly. Test data is provided to validate high hardness and impact resistance.

Lightweight Controlled Collapse Aluminum End Plate for Battery Module

1、The end plate is manufactured from 6061 or 6082 T6 aluminum extrusions using one-shot forming, ensuring high assembly precision. 2、Variable wall thickness and induced holes enable directional collapse for controlled energy absorption. Aluminum’s inherent corrosion resistance eliminates rust and matches vehicle service life. 3、This aluminum end plate achieves over 40% weight saving at equal stiffness compared to steel, directly boosting EV range and reducing energy consumption. Anodizing is available for harsh operating conditions.

High Precision Leak Tested Hard Anodized Aluminum Runner Plate for Cooling

1、The runner plate is machined from 6061 or 6082 T6 aluminum alloy with a hard anodized finish and 100% leak testing. 2、Internal flow channels are smooth and obstruction-free, with a surface roughness of ≤Ra0.8μm and a hole diameter tolerance of ±0.01mm, enabling highly efficient fluid flow. 3、A precision-flat sealing surface and a defect-free mating interface ensure zero leakage. Exceptional corrosion resistance, pressure tolerance, and temperature tolerance are provided, with a service life far exceeding that of conventional parts.

High Rigidity Plug In Multi Deck Aluminum Cargo Body for Heavy Truck

1、The multi-deck cargo body is engineered from 6061 or 6082 T6 aluminum alloy with a multi-cavity design that enhances bending rigidity and load-bearing capacity, overcoming the strength limitations of single-layer aluminum. 2、An extruded reinforced beam structure provides both a high-strength framework and controlled collapse, absorbing impact energy during collisions to protect occupants and cargo. 3、Plug-in and rivet connections eliminate welding heat-affected zones and improve sealing performance, making this heavy truck cargo body suitable for demanding transport applications.

Extreme Lightweight Aluminum Cargo Body for Heavy Truck

1、The heavy truck cargo body is fabricated from 6061 or 6082 T6 aluminum alloys, achieving a weight reduction of 40% to 50% to boost cargo capacity and fuel economy. 2、No coating is required due to aluminum’s inherent corrosion resistance, delivering a service life of over 10 years with a scrap recovery value of up to 70% of the original cost. A robust, fully compliant structure ensures operational safety while providing extreme lightweighting. 3、This aluminum truck body is the ideal choice for fleet operators seeking lower total cost of ownership.